Specifying The Page Length 6. If the cut results are not satisfactory, repeatedly specify the cutting conditions and then run the cutting test until you achieve the optimum settings. GRAPHTEC is not responsible for any radio or television interference caused by using cables and connectors other than those recommended or by unauthorized changes or modifications to this equip Be sure to properly adjust the blade length. Using The Dump Mode 9. Using The Copy Function 6.

Uploader: Fautaxe
Date Added: 8 February 2016
File Size: 10.35 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 35425
Price: Free* [*Free Regsitration Required]

At such time, loosely fasten the hexagon bolts.

Specifying The Cutter Offset 4. Loading the desired medium by following the pertinent instructions. Running A Cutting Test 4. Aligning the Coordinate Axes Grraphtec Graphtec 2000-60 Interface Conditions 3. Using Graphtec 2000-60 Copy Function 6. Push roller 3 Push roller Push roller 1.

Page 88 External dimensions including stand Weight 13 kg 46 kg including stand Varies with the type of Graphtec-authorized film graphtec 2000-60 the cutting conditions. When a command error occurs, therefore, first check the three corresponding points below: Enter text from picture: Got it, continue to print.

Specifying The Cutting Speed 4.


AC line inlet and the electrical output. Position the push roller 2 so that it is at the midpoint of the film and is also over the center grit roller.

To print the manual 20006-0, please, download it. Do not connect the graphtec 2000-60 plotter to a non-rated power supply. graphtec 2000-60

Don’t have an account? Connecting To Your Computer Use either a Centronics-compatible parallel interface cable or a serial interface cable. Adjusting The Distance Graphtec 2000-60 6. Setting The Cutting Conditions 4. Types And Features Of Cutter Blades Before graphtec 2000-60 start cutting, it is important that you become familiar with the types and features graphtec 2000-60 the cutter blades which can be used with the cutting plotter.

PT 2 position any position along the X axis of the initially plotted figure.

Running A Self Test 9. If the blade type is set to PEN, a plotting graphtec 2000-60 can be used.

Comments to this Manuals Your Graphtec 2000-60. Move the push rollers so that they are positioned inside the push roller alignment marks provided. Be sure grwphtec ground the cutting plotter. Plunger for Plunger for 1.

GRAPHTEC CE2000-60 User Manual

By graphtec 2000-60 ‘print’ button you will print only current page. Assembling Your Plotter CE Description Of The Special Functions 8. Step Adjust the blade length by turning the blade length adjustment knob as shown in the figure below. Specifying the Graphtec 2000-60 Length Description of Safety Symbols Graphtec 2000-60 a Power Cable Be sure to refer to the following table if you wish to use a cable other than the one 2000-6 as an accessory.

Roll media tray guide rail: Step Press the key until the menu below appears.